Let’s Get Real: The Specs That Matter
Let’s cut to the chase. We built this Replacement lamp because those Krones Contiform blow molding machines are expensive to keep running. Maintenance costs were climbing, and we wanted to stop the bleeding. So we got to work. The specs here aren’t suggestions—they’re the real deal. It runs on 400V, hits 2500W, and delivers the exact heat needed to melt those PET preforms, right on time, every time. And the size? It’s an exact match to the original. 300mm long, 15mm around. You slide it in, and it just fits. No fiddling, no modifications.
Built to Take the Heat
Here’s what’s inside: a shortwave halogen element, tucked inside a high-purity quartz tube. This combo is what gives you that fast, reliable heat—the kind that keeps bottle wall thickness consistent, shift after shift. The quartz tube is coated, too, which means it can handle the constant shock of heating up and cooling down. It also resists the chemicals from the PET material. And that R7s connector? It’s a tough, standard industrial fit that handles the high current safely. When it’s time for a swap, you can wire it up and get back to work in minutes.
Straight to the Point on the Shop Floor
On the floor, this lamp solves a simple problem. You need the same performance as the OEM part, but you don’t want to pay the OEM price. This delivers. That 400V, 2500W power gives you the throughput you need, but it also means the rest of the machine has to be in good shape. The lamp is powerful, and if the cooling system is struggling, that power can wear it out faster. So yes, it’s a direct replacement that saves you money—but it works best when the whole system is doing its part.
Power Comes with a Price
Let’s be honest—2500W is serious power. It puts a real load on the surrounding parts. Before you install, make sure your voltage is steady and the ventilation is clear. This tube throws off a lot of heat, and your machine’s cooling has to be up to the task. This lamp is the answer to the problem, but it’s not a magic fix. The whole system needs to be ready for it.
Why This Lamp Makes Sense
This is a practical, engineered answer to overpriced OEM parts. You get the right heat, the right fit, and the right connection. It keeps your Krones Contiform running smoothly, without blowing your budget. We built it to live in the Contiform environment. It hits the exact heat profile needed for PET blow molding, so your material flows consistently and the bottles come out right. And the drop-in design? That’s the best part. When a lamp burns out, you swap it in and get back to work. No re-engineering, no downtime. Just a simple, cost-effective way to keep production humming. We designed this to be a reliable, straightforward alternative. It meets the Contiform’s demands and gives you a smarter way to control costs—without cutting corners on performance.